Coloured grass is ideal for sport pitches, children’s playgrounds, golf driving ranges, landscaping and commercial flooring.
Logo’s, slogans and designs can be tufted in fine detail using yarn, standard colours and tints.
If the logo mat has to meet the same specification as the surrounding synthetic grass, we can determine the pile height (10-60mm), gauge and stitch rate, so the logo mat will have the same density. The end ersult will look like a seamless surface!
ARTIFICIAL GRASS INSTALLATION
Installers arrive on site wearing full PPE and sign in if required. Once equipment has been unloaded, installers measure area, take photos, check dips and report temperature.
The area is then dried with a gas lance and cleared of leaves and debris. Edges are primed twice to reduce shockpad shrinkage (if required).
If a safety surface is required, the impact absorbing layer is first installed using SBR rubber. Materials are mixed with a resin-binder and transported by wheelbarrow to the area for laying. The mixture of rubber and resin is levelled to the required thickness, and a screed, roller or hand trowel is used to smooth and lightly compact the surface to gain an even, level finish.
Once the SBR layer has cured, the artificial grass layer is rolled out and cut to size using a stanley knife.
Binder is used to seal joints and prevent lift around edges. Once fixed in place, sand is spread onto the grass. This extra weight means that the grass stays in place. The sand provides stability and protects the turf. As a result, no wrinkles or folds develop through use. The sand also surrounds the long blades of artificial grass and ensures that they remain erect.
Artificial Grass is a low maintenance product. However, it should undergo regular inspection and maintenance to keep it in optimum condition.
INFILL AND BRUSHING
It can take 6-8 weeks for your artificial lawn to reach its optimum condition.
All artificial grass products require an evenly distributed infill and this ‘bedding in’ period allows the infill material to fully penetrate and settle into the structure of the turf.
It is important to brush your lawn on a regular basis. Brushing should take place at least once every month depending on your usage and should be carried out using a stiff brush.
Brushing should be undertaken in a number of directions to help remove debris and leaves. It is important that the turf pile is maintained vertically – this can be achieved by brushing against the pile direction to avoid pile flattening.
From time to time, some infill may appear on the surface of your lawn. This only requires light brushing to return it into the turf structure.
In adverse weather conditions the surface may be prone to frost and/or ice. The surface will not be affected by the application of granular sodium chloride.
Pet stains should be removed straight away. This can be done using a solution of lukewarm water mixed with a gentle household detergent such as washing up liquid.
Additionally, rinse the area down with a garden hose – this will help to remove any lingering odours created by pet waste.
|>> DOWNLOAD ARTIFICIAL GRASS BUILD UP
|Q: Are there different types of artificial grass?
A: Yes, there are different types of artificial grass. Some have short pile and are harder to touch but more durable. Others are longer pile, soft to touch and look more like authentic grass.
Q: Do you have to put sand in the grass?
Q: Is artificial grass suitable for pets and children?
Q: Does artificial grass require any maintenance?
Q: Can weeds penetrate the surface?
A: No, fibres in the artificial grass are tufted into a very strong backing cloth which helps to prevent roots from growing up through the grass. Weeds may occasionally appear on the surface as a result of windblown seeds. Small numbers of weeds can be removed by hand without damaging the surface. If the weeds are removed by hand, it is important to ensure that the full root of the weed is extracted, not broken off.
Q: What is synthetic grass made from?
A: Our synthetic grass is made from either polypropylene or polyethylene yarn depending on its end use. These materials are durable and U.V stabilised, sourced from TenCate Grass, the world’s leading yarn manufacturer. The yarn is tufted into a polypropylene backing cloth and rubber back for maximum turf retention.
Q: Does water drain through the grass?
A: Yes. In fact, our systems have specially designed drainage holes placed consistently throughout the turf to ensure water sheds quickly and efficiently and does not pool on the surface. Sub bases upon which our systems are installed are designed to provide superior drainage properties.